- Run Shimano HollowTech-II cranks in your 386EVO frame
- Shims are based on industry standard 386EVO bottom bracket shells
- 386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.5mm-wide shell
- Easy to install and machined for exact fit
- Shims press fit directly into 386EVO bearings (6806 30mm ID bearings)
- You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
- Removal is the opposite of installation
- You may need to gently tap them out from the opposite side
- Run Shimano HollowTech-II cranks in your 386EVO frame
- Shims are based on industry standard 386EVO bottom bracket shells
- 386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.5mm-wide shell
- Easy to install and machined for exact fit
- Shims press fit directly into 386EVO bearings (6806 30mm ID bearings)
- You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
- Removal is the opposite of installation
- You may need to gently tap them out from the opposite side